Revisions log for Answer #1330
This is the answer to the question How to make a level batten in one plane?
Revision 1
2022‑07‑31 10:20
Active REV1
Initial text
If the rafters are in the plane, then calibrate the bars and plank crates on the machine. And so, we deduce laths in the plane of the screws 6 * 80-120 with a full thread (there are such, without a smooth body). Lattice remains threaded on the screw threads at the required distance from the bar. On a thread straighten the top and bottom battens, and then move the slope of the rule from the board rib and align everything else.