Revisions log for Answer #1528
This is the answer to the question Why are the wires in the wall showing through the plaster?
Revision 1
2022‑08‑10 15:08
Active REV1
Initial text
The problem could be the wire.
A cheap wire with a plastic or rubber sheathing can leave a trace on the wallpaper with a plaster layer of over 20 mm.
You can also check the load, maybe they are very hot.
In my experience, I had to take everything off and do it all over again. In my old building, after the cosmetic repair, the walls also showed traces. I had to rip off the wallpaper, hole and change the wiring and glue it again. The plaster layer was about 50 mm.