Revisions log for Answer #2725

To test the elasticity of the joint, we applied liquid cork to two pieces of EPS, 50 mm thick, docked on the sides and put them in the freezer after they had dried completely. Immediately after the freezer, we bent the seam several times and stretched it. The coating did not crack and stretched sufficiently. Tested the possibility of applying liquid cork directly on the sheets of foam when insulating facades without reinforcing mesh (only grouting the joints). With CIP-panels is a bit easier, the bar, which is inserted into the joints of panels (with a sufficient number of screws that fasten the plate) does not give the cracks in the joints of the plates. Although the technology of assembling a house of such panels, it is recommended to leave a gap of 5 mm. Tested on a personal dacha house made of CIP. In the first winter, the house intentionally left without an external coating to check the behavior of the boards with significant temperature changes.