Ask Builders
Add question
  • Questions
  • Tags
  • Builders
  • Help

Revisions log for Answer #945

This is the answer to the question What to finish a house made of clay adobe?

Revision 1

2022‑07‑01 08:16
Jason D Spencer
Active REV1
Initial text

Saman blocks are made from clay (or rather from clay soil), straw (optionally) sand and water. That is, we are talking about natural and environmentally friendly materials.

Saman blocks are relatively inexpensive building material and those same blocks can be made yourself. To determine the exterior finish should take into account the following:

Saman used to build walls because of its availability (cheapness), or are we talking about environmentally friendly construction using natural materials.

It is also necessary to consider that adobe is actively absorbing moisture and this building material needs to be protected.

When building a house like this you need to pay attention to the roof overhangs (eaves, this protruding beyond the boundary of the wall part of the roof). Water should not run down the walls of the structure. Plus you need to pay attention to the drainage system (gutter), to make the perimeter of the structure, etc. As for finishing, if we are talking about ecological construction, the walls can be plastered and then whitewashed at the finish. This is a variant of finishing of adobe houses used under the Soviet Union.

Plaster can be used lime and clay with the addition of straw (this is an option, there are others). The adobe can be plastered and a "coat" can be sketched on the finish. Or plaster and paint (you need facade paints). If adobe is used as a cheap building material and you want to see your building with a more modern finish, you can clad such a house with thermopanels.

Although it is necessary to take into account whether it is necessary to insulate additionally a house from adobe, usually this building material is used in regions with a mild and dry (relatively) climate, and the thickness of the walls can be different.

It is also possible to wrap the adobe house with siding or use facade tiles.

A more expensive option, to clad the adobe house with a brick. The brick is laid under the expansion with a small distance from the walls. To lay a brick not under the grouting and then plaster it is not quite logical in this case.

If we're talking about interior decoration, it's plaster and whitewash. Or stucco and paint. A more expensive option, the combined interior decoration with natural stone and paint. You can glue wallpaper, you can apply decorative plaster, etc.

2022‑07‑01 08:16
Jason D Spencer
Active REV1
Initial files
No attachments
Log in Join
Privacy Policy・Terms of Service