Revisions log for question
How do I fix cracks in the stucco facade of my house?
Revision 1
A couple of years ago insulated the facade and did a Baumit stucco facade for the house.
House is on a 300mm slab, wall material – polystyrene-concrete blocks 300mm (wall thickness), insulation 50mm EPPS planted on the adhesive, mesh with adhesive on top, then wiped plaster Baumit Silicone Top 1,5K ST10, coloring with paint Silikat.
At this point, I identified a few jammy spots:
My understanding (I was very far removed from construction and everything related to it) is that the stucco is done first and then the roof trim with siding and the rest of the adjacent (to the facade) elements.
The craftsman installed the flashing for the shingles, hung the siding, and then put mesh and glue on top and wiped the stucco off!
As a result, these two areas have blown and cracked.
And the second problem is that when installing the flashing strips on the roof of the 1-story additions to the main house, they didn't have much of this strip, and they grouted the stucco right onto the shingles-naturally everything blew and fell off in that spot.
Please advise how to properly install now do not get a piece of the adjoining plate to the slab?
I was offered to attach to the wall and self-tapping to the facade!