Revisions log for Answer #1322
This is the answer to the question How do I install a sliding door in the wall?
Revision 1
2022‑07‑31 02:34
Active REV1
Initial text
I solved this problem the same way. The wall opening is twice the width of the doorways, plus some room to maneuver. Be careful with the wall opening lintel, it should be higher than the standard height for doors. After all, you still need to accommodate the track and carriage, or the door leaf will have to be shortened. Prefabricated systems are good, of course, and I've flirted with them, too, but a simple track handles just as well.
After I had the door panels hanging, I again covered both sides of the wall with 50er drywall profile. The wall was 17.5cm thick (plastered 20cm), which then fit exactly (2x7.5cm drywall + 5cm gap for the doors).