Revisions log for Answer #1988
This is the answer to the question How to calculate the frequency of attachment of the wall plate to the reinforcement bridge?
Revision 1
2022‑09‑05 08:50
Active REV1
Initial text
You can also just use a 12mm rebar, if the reinforcement layer of the monolith is 35-40cm. Drilled 10 mm drill straight through the mauerlat to a depth of 25-27cm and hammered a stud of rebar. It holds even in AAC blocks. Well, if the wind blows 30-40m/sec, and hammered studs all burst and fly out.